RASCO SOLID Spreaders

SOLID X: The best choice for spreading with materials such as fine salt with a low moisture content or stone granules. Precision and efficiency of work with SOLID X is enabled by an auger conveyor system. The auger conveyor has a built-in fragmentation mechanism which prevents the passage of larger lumps of material for dry spreading onto the spinner.

SOLID L: Specially designed for work with the most demanding materials for dry spreading, such as wet and adhesive sand with a high percentage of clay, coarse sea salt or a mixture of different materials. High reliability and efficiency of the spreader is guaranteed by a strong chain conveyor which prevents the formation of a tunnel effect, regardless of the quality of spreading agents.

SOLID T: Intended for spreading with dry materials with low or moderate humidity. Reliability of spreading with more demanding materials using the SOLID T spreader is guaranteed by a rubber belt conveyor used for supplying the material. The shape of the belt conveyor prevents adhesion of the material, and a part of the conveyor system is also equipped with a fragmentation system for the spreading material.

SOLID XX: SOLID XX uses two auger conveyors as the transportation element. Therefore, SOLID XX can be used as a spreader for one or two materials for dry spreading. If the spreader carries two materials for dry spreading, the hopper is divided into two sections.
SOLID LLB: Unique solution which combines the best characteristics of every known conveyor system. The main advantage of this system is the prevention of falling out of the spreading material into the box or on the vehicle chassis, providing simultaneous robustness and reliability of the steel chain conveyor system. This conveyor system ensures uniform discharging of the spreader and continuous fragmentation of the material for dry spreading before it is delivered to the distribution system.